STANDARD BUCKET
Standard bucket for universal use on farm. Useable for loading sand, sawdust, gravel, manure,... Bucket is made from grain steel, it has light ownweight. Cutting edge is made from resistant material (HARDOX). Bucket can be with or without teeth.
Width 140 cm -> Volume 0,40 m3 -> Weight 140 kg
Width 160 cm -> Volume 0,50 m3 -> Weight 155 kg
Width 180 cm -> Volume 0,65 m3 -> Weight 170 kg
Width 200 cm -> Volume 0,80 m3 -> Weight 185 kg
Width 220 cm -> Volume 0,92 m3 -> Weight 230 kg
Width 240 cm -> Volume 1,10 m3 -> Weight 250 kg
MANURE FORK
The manure forks are made of fine-grained steel, with light own weight. Clamping hooks can be made for almost all type of loaders (EURO, Riko, Hauer, M-X, Zettermayer, ...).
Width 130 cm -> Number of tines: 8 -> Weight 140 kg
Width 160 cm -> Number of tines: 10 -> Weight 160 kg
Width 180 cm -> Number of tines: 11 -> Weight 180 kg
Width 200 cm -> Number of tines: 12 -> Weight 200 kg
WRAPPED BALE HANDLER
The bale grip is designed and tested in an ideal ratio of strength to lightweight construction. It is suitable for all types of bales 80 to 160 cm and for weight up to 1200 kg. There are no sharp edges that may damage the film. Clamping hands are floating, which allows you easier hanling od bales.
Clamping hooks are made for all types of loaders (Euro mounting, RIKO; Hauer, M-X, Zettermayer, ...).
3rd control circuit is required
PALLET FORKS
Pallet forks with a capacity of 1800 kg / pair (fork size 100x35x1050). Adjustable pallet fork width up to 1250 mm. Standard fork length is 1050 mm (shorter or longer are available on request)
Clamping hooks are for all types of loaders (Euro mounting, RIKO; Hauer, M-X, Zettermayer, ...).
Leveling and grab bucket (4-in-1)
The 4v1 bucket is a universal tool for many types of work such as:
1. Bucket
2. Gripping with the bucket bottom
3. Leveling with the back of the bucket
4. Opening the bucket floor for unloading
The front jaw provides gripping. With the front jaw open, the bucket can be used to plan the terrain with the help of a rear wedge.
Width 160 cm -> Weight 320 kg
Width 180 cm -> Weight 370 kg
Width 200 cm -> Weight 430 kg
Width 220 cm -> Weight 480 kg
3rd control circuit required
Bale spikes
An easy tool for transferring dry round or rectangular bales. The bale tines can be folded upwards so that the tractor can travel safely on public routes. They are available with different lengths of spokes. 800, 900, 1000, 1200, 1400 mm.
Top loading grip
The log hook serves as an accessory to the pallet forks for gripping logs. The hook provides good log hold and prevents unexpected log slipping from the fork. The hook can be custom-built on all versions of pallet forks and supports.
3rd control circuit required
GRAPPLE FOR BUCKET OR MANURE FORKS
Manure fork with grapple. Grapple is perfect to transport manure or corn silage. Grapple is made for all types of manure forks and buckets (on request we also make grapples on implements from other manufacturers )
3rd control circuit required
TUBE FOR BALES - FOR PALLET FORKS
Tubes can be mounted on pallet forks and are used for transporting sillage bales. Smooth surface ensures that sillage bale film is undamaged. Length of tube is 1200 mm.
Bale transport device
For transporting sillage bales. Smooth surface ensures that sillage bale film is undamaged. Length of tube is 1200 mm.
LOGGING BLADE
The curved design of the blade ensures an optimum grip on the logs. The blade is available with or without a down holder. The cutting edge is made from high-strength and hard-wearing steel which allows owners to use the logging blade also for grading and cleaning up sites.
Width 150 cm.
MANURE FORK WITH CLAMP - CROC
Manure forks are made of fine-grained quality steel, which allows for low wear and low weight. The fork are equipped with forged teeth. The profiles are additionally reinforced with cones. All models have two hydraulic cylinders. The tines make a circular motion through the material, which produces the cleanest cut, the least power requirement and the longest service life for the tines. Clamping hooks are for all types of loaders (euro fastening, RIKO; Hauer, M-X, Zettermayer, ...).
Widths 130 - 160 cm (other widths can also be made to order)
BUCKET WITH CLAMP
Bucket are equipped with forged teeth. All models have two hydraulic cylinders. The tines make a circular motion through the material, which produces the cleanest cut, the least power requirement and the longest service life for the tines. Clamping hooks are for all types of loaders (euro fastening, RIKO; Hauer, M-X, Zettermayer, ...).
Widths 130 - 160 cm (other widths on request)